The use of nickel wire and nickel strip: they are mainly used in the manufacture of nickel cadmium, nickel hydrogen, nickel batteries, combined batteries and instruments, telecommunications, electronic vacuum, special bulbs and other industries.

Specification for nickel belt: (thickness * width * length: 0.03-1.20*2-150* ≥ 3000 /mm).

Our introduction of pure nickel strip:
The condition of the nickel foil: soft (M), semi hard (Y2), hard (Y)
The packing, marking, transportation and storage of strips shall be specified in accordance with GB8888.

Surface quality:
1. The strip shall be smooth, clean, and shall have no wind, cracks, bubbles, spikes, folds and inclusions.
2. The strip thickness should not exceed the allowable deviation of the spots, scratches, pits, indentation and roller printing defects. Oxide color slight, dark and light local traces have no discarding criteria.
3. The strip on both sides should be even cut without burr, crack edge and edge.
4. The strip shall be flat but allow a slight wave, the side curvature of the strip shall not be greater than 3 mm per metre.