In the wire cutting machine processing, the material of workpiece is corroded, and the loss of molybdenum wire will become larger if the new wire is not replaced in time. At the same time of cutting and forming, the electrode wire molybdenum wire will also be corroded by discharge, that is, the loss of electrode wire molybdenum wire will occur. When the electrode wire is used for a long time, the wire diameter becomes thinner and is covered with micro-discharge pits, the tensile strength decreases and finally breaks. When measuring the diameter of the filament to reduce 0.03~0.05mm, the new filament should be replaced.
Our wire cutting molybdenumwire has been largely to Brazil. Welcome to enquire.
