Zhengzhou Sanhui Co., Ltd can design and process all kinds of vacuum plating tungsten boat, molybdenum boat according to customer requirements. Products use the technology that reduced internal stress to reduce mechanical damage in the process, in order to increase the service life. Ultrasonic cleaning and vacuum packaging are used to ensure that the product is not contaminated before use, to ensure the quality of your coating.

The processing method of molybdenum boat is as follows: a kind of method for processing metal molybdenum ware, which relates to the reduction process in metallurgy and chemical engineering, the processing method of molybdenum crucible, molybdenum boat and other metal molybdenum and molybdenum alloy ware. It is characterized in that it adapts 1.5mm to 4mm thickness molybdenum alloy plates, the mold and the molybdenum alloy plate are heated at the same time and the temperature is kept at 400 to 1200 degrees, the control hydraulic pressure speed is controlled in 5mm/min-1mm/min, a daora deep forming is carried out. The method of the produced by our company is that uses high temperature strength and moderate plastic molybdenum alloy plate to warm the mold and plate simultaneously, the hydraulic press slowly draws to make box or round molybdenum crucible, molybdenum and other metal molybdenum and molybdenum alloy vessel, the wall thickness of the utility model is less than 1.5mm, and the utility model can effectively avoid the cracking, fold and other phenomena occurring in the drawing process, effectively reduce the defects of the molybdenum alloy ware, improve the yield of the finished product, and prolong the service life of the metal molybdenum utensil.